universal pellet extruder 0.8MM nozzle for 3D printer filament Plastic Granules crusher extruder assembly kit

the kit with 0.8mm nozzle

There are 2 heater cartridge mount holes. You can use 1 or 2 pcs heater cartridge for printing.

Plastic pellet should be 300um. and do not mix different plastic for printing.

Some important tips:

 1，Make sure motor counterclockwise rotate ,so the filament can be screwed out.

2, you only need change the setting parameters in slice software(Cura,Simplify 3D,Prusa slicer etc.),and do not change any firmware of the mainboard.

3, 0.6mm, 0.8mm and 1.0mm nozzle is OK for the pellet extruder. we send 0.8mm nozzle with the extruder