Note:1,The kit includes 6 panels,fasteners, magnets and heat insert, but without printed parts which you must print them.
2,The price excludes import tax,customers must be resonsible for all duties,import taxes and brokerage fee.
This enclosure is a DIY project designed for Prusa MK3(s) MK4(s) 3d printer by Sandeagle, it can keep the room hot enough, it's a neccessary add-on for printing ABS, ASA and PC filament. Blurolls get permission from Sandeagle to sell the panels kit, and he will get small portion from each sale to develop wonderful project. The link of this project:https://www.printables.com/model/1009231-printclosure-project
Description
printed Enclosure Project for Prusa MK4/S - PrintClosure
Can be printed even on smaller footprint printers (like Prusa Mini).
Uses printed pins and standard M3 Screws for connecting individual parts.
Compensator parts included (for compensation of plastic shrinkage due to the heat)
All parts together costs ~ 2kg of PETG Filament (depends on your print settings). Printed and tested for enough structural stability with: 2 perimeters 15% Gyroid infill Please consider using brims (due to sharp corners).
Additional parts:
These Printed Hinges
2x 480mm x 580mm 3mm thick PC panelforside panels
2x 240mm x 480mm 3mm thick PC panelfor doors
1x 480mm x 480mm 3mm thick PC panelfor rear panel
1x 510mm x 410mm 3mm thick PC panelfor top panel
24x ThreadedHeat Insertsfor hinges and corners (bigger holes inside parts X1 and X2)
8x 10x2mm Neodymium magnets
~60 M3x10 Screws (Side panels)
~30 M3x16 Screws (Connecting individual parts)
8 M3x25-30 Screws (For corners)
~100 M3 Nuts (~50 minimum) (You don't have to use every hole, but more screws = more structural integrity)
